PRODUCTS
Fiber Isolated DC Current Probe
The DCCP from SAKER is a novel DC current probe that provides high voltage isolation via fiber optic cables. Not only is this approach advantageous from the voltage isolation point of view, but is also immune to typical radiated interferences and capacitances created when using long coaxial measuring cables. Both probe head and handheld receiver are battery powered. The receiver lacks a proprietary output connector and thus can be connected to any oscilloscope or measuring instrument via a standard BNC connector.
Models are available in 100, 500 and 1000A current ranges.
When not in use both emitter and receiver can be configured into standby mode, which reduces power consumption and increases battery duration.
Isolated DC Current Probe DCCP
Quick DCCP Guide
Flyer DC Current Probe
Specification | DCCP100 | DCCP500 | DCCP1000 |
---|---|---|---|
Bandwidth | DC..25kHz | DC..25kHz | DC..25kHz |
Sensitivity | 50mV/A | 10mv/A | 5mv/A |
Maximum measurable current | 110A | 510A | 1050A |
Batteries, emitter and receiver | 2xAA | 2xAA | 2xAA |
Circular conductor diameter, max | 23mm | 23mm | 30mm |
Overall accuracy | 2% | 2% | 2% |
Fiber cable lengths | 3m standard, 7 and 15 optional. Contact for other lengths | 3m standard, 7 and 15 optional. Contact for other lengths | 3m standard, 7 and 15 optional. Contact for other lengths |