PRODUCTS

Rogowski AC Current Probe. RCP

 

 

 

The RCP current probe is based on a rogowski coil which is small, lightweight and can be tied around conductors without breaking the current path. The current sensor is available in two options, 20cm pigtail or attached to the amplifier box, thus lacking the typical coaxial cable that usually clutters measurement setups.

The probe can be connected to any oscilloscope or measuring instrument via a standard BNC connector. The amplifier box also signals the user of a possible low battery condition.

 

Rogowski AC Current Probe RCP
Flyer RCP

 

 

 

SpecificationRCP500 / RCP500PRCP1000 / RCP1000PRCP2000 / RCP2000P
Bandwidth2Hz..2MHz2Hz..2MHz2Hz..2MHz
Sensitivity10mV/A5mv/A2.5mv/A
Maximum measurable current530A1060A2120A
Measuring delay160ns160ns160ns
Batteries2xAA2xAA2xAA
Rogowski enclosed circular conductor diameter, max71mm71mm71mm
Output noise<3mVrms<3mVrms<3mVrms
IncludesAA batteries
2m BNC cable
Carrying case
AA batteries
2m BNC cable
Carrying case
AA batteries
2m BNC cable
Carrying case

 

 

 

Back to Products